 |
 |
Glass
Kilns 120 Volts |
|
 |
|
|
|
|
Click
image for larger view of each model |
|
|
|
 |
Model - 129FL w Pyro & GLift/120v |
129
front loader equipped with
pyrometer and guillotine lift
for annealing beads
Model -
129FL w Pyro & GLift/120vInside
dimensions: 11 ¼" wide
x 9" deep x 9 ¾" high
at peak, fires to 2250° FModel
comes with attached stand,
peephole plug, instruction
manual, and warranty card.
Two-year warranty. |
Model - Square 139FLE w GLift & Punty
Door/120v |
139
front loader equipped with electronic
controller and punty door for
annealing beads; guillotine lift
option
Model - 139FLE w GLift & Punty
Door/120v
Inside dimensions:
12.5" wide x 9" deep
x 7.5" high, fires to 1700° F
Model comes with attached stand,
peephole plug, instruction manual,
and warranty card.
Two-year warranty. |
Model - 1210 front loader |
1210 front loader equipped with electronic controller and punty door for glass annealing; guillotine lift standard with punty door option, elements in the top of kiln
Model - 1210FLE/120v
Inside dimensions: 12" wide x 12" deep x 10" high, fires to 1700° F
Model comes with attached stand, peephole plug, instruction manual, and warranty card.
Two-year warranty. |
Model: HOTSIE/120v |
Model - HOTSIE/120v Hotbox with quartz viewing window in lid.
Inside dimensions: 8"x 8" wide x 4.5" deep, fires to 1700°F; fiber lid and bottom, removable lid, bottom and firing chamber with handles on each section.
Model comes with attached stand to bottom, one peephole plug, instruction manual, and warranty card.
One-year warranty |
Model: HB84E/120v |
Model
- HB84E and HB84E with Bead Collar/120v
(Bead collar has a punty door
for annealing beads or other
items that need heat treatment
while working)
Inside dimensions:
8"x 8" wide x 4.5" deep,
fires to cone 10/2350°F;
with bead collar - 8" x
8" wide x 10" deep,
fires to 2000° F
Model comes
with stand, two peephole plugs,
instruction manual, and warranty
card.
One-year warranty |
Model
- HB86E w Bead Collar/120v |
Hot
Box 86 with Bead Collar equipped
with 3-key controller
Model - HB86E w Bead Collar/120v
Inside dimensions: 8 " x 8" wide x 10 1/2 " deep, fires to 2000° F
Model comes with attached stand, peephole plug, instruction manual, and warranty
card. One-year warranty. |
Model
- 126GFE w Quartz Port/120v |
126
glass fusing equipped with electronic
controller and quartz porthole
option
Model - 126GFE w Quartz Port/120v
Inside dimensions: 11 ¼" wide x 6 " deep, fires to 1700° F
Model comes with tall stand, peephole plug, lid wedge, instruction manual, and
warranty card. Two-year warranty. |
Model
- 146GFE/120v |
146
glass fusing equipped with electronic
controller
Model - 146GFE/120v
Inside dimensions: 14 ½ " wide x 6 " deep, fires to 1700° F
Model comes with tall stand, peephole plug, lid wedge, instruction manual, and
warranty card. Two-year warranty. |
Model
- Square 146GFE/120v |
Square
146 glass fusing equipped with
electronic controller
Model - SQUARE 146GFE/120v
Inside dimensions: 14 ½ " x
14 ½ " wide x 6 " deep,
fires to 1700° F
Model comes with tall stand,
peephole plug, lid wedge, instruction
manual, and warranty card. Two-year
warranty. |
Model
- 146GFETLC/120v |
146
glass fusing equipped with electronic
controller, top and clamshell
loading
Model - 146GFETLC/120v
Inside
dimensions: 14 ½ " wide
x 6 " deep, fires to 1700° F
Model
comes with attached tall stand,
peephole plug, lid wedge, instruction
manual, and warranty card.
Two-year
warranty. Crating charges apply. |
Model
- 186GFETLC/120v |
186
glass fusing equipped with electronic
controller, top and clamshell
loading; has double insulated
lid and bottom
Model - 186GFETLC/120v
Inside
dimensions: 17 ½ " wide
x 6 " deep, fires to 1700° F
Model
comes with attached tall stand,
peephole plug, lid wedge, instruction
manual, and warranty card.
Two-year
warranty. Crating charges apply. |
Model – The Traveler/120v |
The Traveler is equipped with a 3-key electronic controller and is built in 3 sections with an element in the lid for glass fusing. Removable center section for changing depth of kiln.
Model – The Traveler/120v
Inside dimensions: 12 ½ " x 12 ½ " wide x 13 ½ " deep, fires to 2000° F.
Model comes with attached stand with castors, three peephole plugs, lid wedge, instruction manual, and warranty card.
Two-year warranty. |
|
|
|
|
|
Glass
Kiln Options |
|
|
|
|
 |
RTC-1000
Electronic Controller
Olympic's Electronic Controller
or Wall Unit for glass kilns
is designed specifically for
glass. This controller allows
the flexibility to program "on
the fly" and make changes
to the program while firing.
Stores up to six user programs
with eight segments per program
and programs 5 & 6 can be
combined to create a 16-segment
program. The controller will
add time in 5 minute increments,
has 3 speeds - slow, medium,
fast - multi-zone control, delay
start, alarm, error codes and
computer interface is available. |
 |
Lid
Mode Switch
Provides flexibility for glass
fusing kilns equipped with an
electronic controller.This allows
the kiln operator
two modes of flexibility when
firing: 1) When the toggle switch
is in the Up position, the electronic
controller runs both the lid
and body elements; and 2) when
the toggle switch is the Down
position, the lid element is
controlled manually by an infinite
switch. The mode switch is standard
on all Olympic Glass Fusing Kilns
except 120-volt models. These
models have a
toggle switch to give 100% power
to either the lid or body elements.
On the 120 volt glass kilns when
the toggle switch is in the UP
position, the lid element is
on full power for fusing and
when the toggle switch is in
the DOWN position, the wall element
is operational. |
 |
Quartz
Porthole
Allows the operator to view the
glass within the kiln while firing.
Maximum firing temperature 1700°F. |
 |
Punty
Door
is available as an open slot
or flip-up style door. The front-loading
style is perfect for jewelry
making and wax burnout with its
peaked roof and porthole for
ventilation. Punty Door is available
as an open slot or flip-up style
door. The models are available
as a base kiln with elements
and switches only or with options
for a pyrometer or electronic
control. The front-loading style
is perfect for jewelry making
and wax burnout with its peaked
roof and porthole for ventilation. |
 |
Flash
Arm
option provides a lid brace arm
for flash venting and raking
glass. The arm is positioned
in front of the kiln for easy
access and may be set with a
clearance of 2 3/4" or 4" and
it has a wood handle which keeps
the Flash Arm cool for easy operation.
Oval and 28-inch diameter glass
fusing kilns require a counter
weight lid system to use the
Flash Arm. Other Olympic glass
fusing kilns may be retrofitted
wih the Flash Arm. Exceptions
would include Olympic ovals and
28-inch glass fusing kilns that
do not have a counter weight
lid system. |
 |
Center
Hinged
design provides clamshell and
top loading capabilities for
deeper glass fusing models. Now
kilns 14-inch deep can be opened
clamshell style without becoming
too top heavy for the kiln operator.
Center hinged kilns can be hinged
at the top and center of the
kiln chamber for the kiln operator
who wants top and clamshell loading
capabilities. |
 |
EZ
Fuse CD
developed by Andy Pal shows how
to program RTC-1000 electronic
controller and illustrates how
the controller (RTC-1000) will
display the information as it
goes through each segment. Programs
designed for full fuse, tack
fuse, drop ring, drape, etc.,
and for different COE glass.
(see additional images below) |
|
|
|
|
|
|
|
|
|
|
