Talk With An Expert (800) 241-4400

Quatro 16

Availability: 2-3 weeks from receipt of order
Pricing with 3 Key controller
Reg. $1,235.00
Compare Product

Quick Overview

Model - Quatro 16 - 120 volt, inside dimensions: 16.5" x 16.5" wide x 6 " deep, fires to 1700° F


The Quatro 16 provides a square glass fusing kiln for individuals who need a kiln larger than 14.5" x 14.5" wide (Square 146GFE) but not as large as 18" x 18" wide (Square 186GFE). Glass firing kilns are used for fusing and forming of glass shapes, precious metal clay and heat-treating.  120 volt glass fusing and precious metal clay models are equipped with a lid element for the fusing segment of the glass firing and a body element for the ramping up, down and annealing segments of the firing.  A selector switch is on the electrical box to designate either the lid or body element to heat during the firing.  Only one of the elements can be used at a time because of the limited power of 120 volts.  If the selector switch remains in the neutral position, neither element will heat.  Models come equipped with pilot light, 18” tall metal stand, stainless steel jacket, and Bartlett Instruments 3 Key electronic controller.  Data is entered by scrolling through the up and down arrows for the desired ramp/hold programming.  


Model comes with tall stand, peephole plug, lid wedge, instruction manual, and two-year warranty.


Upgrade to the 12 key digital RTC-1000 controller for more ramp-hold user programs and multiple features including delay start, preheat, skip step and many more for precise firings every time.  Messages and Information are available for reviewing a firing profile before or during the firing, and for viewing the current segment the firing is in.  Other options include the lid lift assist, which makes it easy to open and close heavy kiln lids, bead door, quartz glass viewing window, Type S thermocouple, vent and much more! 


Furniture Kits for 120 volt glass fusing and PMC kilns include 2 layers of shelving for stacking ware, assorted square posts, ceramic paper and a one pound bag of kiln wash.  Choose the standard furniture kit or build your own with shelves and posts in the quantities required.

Quatro 16 with RTC-1000 controller

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Quatro 16 with RTC-1000 controller
  • Quatro 16 inside view
  • Quatro side view
  • 3 Key & RTC-1000 Controllers
  • Optional Furniture Kit
ModelQuatro 16Wiring Specifications
Equipped with Lid Lift Assist Optional 120 Volts
Inside Chamber Dimensions w x d x h (inches) 16.5 x 16.5 x 6  16 Amps
Cubic Feet .95 1920 Watts
Outside Dimensions with Stand or Frame w x d x h (inches) 26 x 26 x 29 20 Amp Breaker Required
Brick Thickness 3" Plug Configuration: NEMA 5-20
Maximum Temperature 1700°F/927°C Copper Wire Size: #12,#10 if circuit is longer than 40 ft
Est Ship Wt 190 lbs

Details

Receiving Your Kiln

Olympic Kilns packs its merchandise so that it will arrive at its destination undamaged. Olympic orders are FOB origin when they leave our loading dock. This means we hold the carrier's receipt that your order left in good condition. We do not allow any deductions from invoices for damaged ware. It is the receiver's responsibility to understand and comply with standard shipping and receiving practices as described in this section. The carrier is responsible for transporting your freight but not for unloading it. A lift gate is required if you do not have a loading dock for shipments delivered by freight carrier. UPS and FEDEX will deliver smaller shipments to your door.

If you do not have a loading dock, a lift gate for transporting the freight from the truck to ground level is required upon delivery. You will need to request lift gate service when ordering your kiln from your Olympic dealer. Otherwise additional freight charges will be incurred upon delivery of freight. It is your responsibility to move the freight from the truck to its place of use.

Lift gates are available for kilns on 6 ft. x 6 ft. pallets or smaller. Any Commercial Glass Fusing kiln and 20 cubic feet or larger Commercial Electric and Downdraft Gas models require the customer to have a forklift that can move the kiln from the truck to the desired location. If you do not have access to a forklift, check the internet or yellow pages for small moving companies that can take the freight off the long distance carrier and move the freight to the desired location. Give any prospective mover a physical description of the kiln, the weight, and inform them that it is designed to be picked up with a pallet truck or forklift only.


Kiln Location

1. Adequate space - at least 12 inches of space between the kiln and the wall. (However, for operator comfort, allow room to walk around the kiln if maintenance is required. Stackable kilns require tightening of the kiln rings while firing for proper alignment.)

2. All flammable materials such as curtains, plastics, etc. in the area of the kiln should be removed. Determine room size required from the outer dimensions of the kiln you wish to purchase. For commercial kilns, check door width, and if the door is insufficient to allow kiln entry, contact Olympic Kilns to check if modifications can be made to kiln before it is ordered and built.

3. Proper ventilation - Heat can accumulate in restricted areas above both gas and electric kilns if a hood is not used. If the kiln is gas and located in a confined area it is essential that an exhaust hood be place above the kiln and vented to the outside. This ensures removal of heat and exhaust gases, including carbon monoxide. Even if the kiln is outside be sure that the hot exhaust gases do not cause damage. Check all local requirements or codes before installation.

4. If the kiln is to be placed outside, ensure that moisture is not permitted. Use a roof over the kiln or some type water resistant tarp when the kiln is not being fired.

5. Remember to use sheet metal or non-flammable material to shim the legs when leveling the kiln.

Kiln Installation

Position the kiln with the observation holes clearly visible and with the electronic controller within easy reach. For kilns equipped with a power cord, place the kiln to the left of the proper electrical outlet so that the kiln can be plugged in without touching the metal jacket. Because all kilns generate heat the stand or frame should be placed on a concrete floor. Tiles or linoleum could be damaged without this precaution.

If the kiln is to be placed outside, ensure that moisture is not permitted. Use a roof over the kiln or some type water resistant tarp when the kiln is not being fired. Remember to use sheet metal or non-flammable material to shim the legs when leveling the kiln.

Electrical Hook-Up

To provide the performance it was designed to give, your new kiln must have the proper outlet and breaker to supply adequate voltage and amperage. An incorrect connection may cause disappointing or even hazardous results. A qualified electrician needs to be consulted to determine whether your wiring is adequate.

Electric kilns running on 120 volts will plug into a standard outlet but check your breaker to ensure proper performance. Standard electric kilns will run on 240 volts, single phase. If your kiln was ordered 208 volts, single or three-phase power, it will be noted on the nameplate on the kiln. Commercial electric kilns may be wired for 240, 208, 380, or 480 volts; single or three phase. Most commercial kilns require direct wiring and a receptacle outlet is not required.

Any kiln ordered three-phase will be direct wired (there is not a power cord attached to the kiln).
Reg. $1,235.00