Olympic electric kiln models come equipped with pilot light, metal stand, stainless steel jacket, and Bartlett 3K-CF electronic controller . Data is entered by scrolling up and down buttons for the desired cone fire or ramp/hold programming, One-year Limited Kiln Warranty for Cone 10 models and Two-year Limited Kiln Warranty for Cone 8 models.
Additional options include upgrading to the 12 key digital Bartlett V6-CF controller, furniture kit and kiln vent.
The V6-CF controller provides more ramp-hold user programs and multiple features including delay start, preheat, cone offset, skip step and many more for precise firings every time. Messages and Information are available for reviewing a firing profile before or during the firing, viewing the current segment the firing is in, and cone table for easy look up of temperature and cone number equivalents.
Furniture Kits contain shelves for
stacking ware, assorted square posts and
kiln wash. Choose the standard furniture kit
for the Olympic kiln model chosen, or build
your own with shelves and posts in the
quantities required. CoreLite shelves (hollow centered shelves with smooth surfaces) are available for select models.
During operation, the Kiln Vent system keeps the kiln under a slight negative pressure. This pulls the fumes out of the kiln and pulls in a small amount of fresh air. Firing times are essentially the same. The fumes are exhausted directly into a duct system and removed from the kiln room. Improved airflow in the kiln results in more uniform temperatures, reducing hot and cold spots.
VentMaster 115V, 60 Hz., 1.1 amp
208-240 Volt, 50/60 Hz., .5 amp
Motor 73 CFM1 Weight 10 lbs. (4.5 kgs)
Hose 3-foot High Temperature Hose2
- “Cubic Feet per Minute”. Normal room conditions will replenish air, no need for makeup air system.
- Available VentMaster Extender Kit extends length an additional three feet.